Snap-in version
Sandwich/rear-side
PCB

IEC connector C14 or C18
Screw-on mounting
PCB

Series

GSP2

IEC Appliance Inlet C14 or C18, sandwich Mounting, PCB-Terminal

39 Variants

Connectors (Inlets/Outlets)

C14

70° C

C18

70° C

Approvals and Compliances

Description

Panel mount: Snap-in or screw-on mounting on PCB, sandwich / rear-side:
Appliance Inlet, Pin temperature 70 °C, protection class I or II
V-Lock notch standard
For PCB mounting

Other versions on request

Ground terminal with quick-connect terminal or solder terminal

Detailed request for product

Details GSP2

Technical Data

Approvals and Compliances

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

10 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

15 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 3 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP40 acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I or II acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

For PCB mounting : Ground terminal: Quick connect or solder terminals, angled or straight

Panel Thickness S

See details in drawing
Snapper

Sandwich/rear-side: 1.5/2/2.5/3 mm

Material: Housing

Thermoplastic, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C14 / C18 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: GSP2

Certificates	Certification Body	Description
VDE Approvals	VDE	Certificate Number: 40012767
UL Approvals	UL	UR File Number: E96454
CCC Approvals	CCC	CCC Certificate Number: 2006010204183838

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements
	Suitable for applications acc.	IEC 60335-1	Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13.

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
	SCHURTER AG	V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
White Paper Glow wire test	SCHURTER AG	Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13.

Dimensions [mm]

	Snap-in mounting

	Screw-on mounting



	Pin axis refers to the inlet pin orientation



	A: Rear panel mounting



	B: Sandwich mounting

Drilling diagrams

	Drilling diagram for printed circuit board

	* No hole necessary for protection class II d1 = 6±0.05 for 'Snap-in' mounting, for printed circuit board thickness = 1.6 mm

	Drilling diagram for printed circuit board

	* No hole necessary for protection class II d1 = 6±0.05 for 'Snap-in' mounting, for printed circuit board thickness = 1.6 mm

Short Table of Variants GSP2 Open complete table GSP2

Protection Class	PCB mounting	Panel Thickness s [mm]	Order Number	...

I	Snap-in	1.5	GSP2.8101.13	...
I	Snap-in	1.5	GSP2.9101.13	...
I	Snap-in	1.5	GSP2.9901.13	...
I	Snap-in	1.5	GSP2.9111.13	...
I	Snap-in	1.5	GSP2.8003.13	...
I	Snap-in	1.5	GSP2.9003.13	...
I	Snap-in	1.0	GSP2.9103.11	...
I	Snap-in	1.5	GSP2.9103.13	...
I	Snap-in	2.0	GSP2.9103.14	...
I	Snap-in	2.5	GSP2.9103.15	...
I	Snap-in	3.0	GSP2.9103.16	...
I	Snap-in	1.5	GSP2.9903.13	...
I	Snap-in	1.0	GSP2.8113.11	...
I	Snap-in	1.5	GSP2.8113.13	...
I	Snap-in	1.5	GSP2.9113.13	...
I	Snap-in	2.0	GSP2.9113.14	...
I	Snap-in	3.0	GSP2.9113.16	...
I	Snap-in	1.5	GSP2.810C.13	...
I	Snap-in	3.0	GSP2.911E.16	...
I	Screw	1.5	GSP2.8201.13	...
I	Screw	1.5	GSP2.8203.13	...
I	Screw	1.0	GSP2.9203.11	...
I	Screw	1.5	GSP2.9203.13	...
I	Screw	2.0	GSP2.9203.14	...
I	Screw	3.0	GSP2.9203.16	...
I	Screw	1.5	GSP2.9205.13	...
I	Screw	1.5	GSP2.9213.13	...
I	Screw	2.5	GSP2.9213.15	...
I	Screw	3.0	GSP2.9213.16	...
I	Screw	1.5	GSP2.820C.13	...
I	Screw	1.5	GSP2.820E.13	...
II	Snap-in	1.5	GSP2.9100.13	...
II	Snap-in	3.0	GSP2.9100.16	...
II	Snap-in	1.5	GSP2.9110.13	...
II	Screw	1.5	GSP2.9200.13	...
II	Screw	2.0	GSP2.9200.14	...
II	Screw	3.0	GSP2.9200.16	...
II	Screw	1.5	GSP2.9210.13	...
II	Screw	2.0	GSP2.9210.14	...
Additional version on request, e.g.: Ground terminal straigt or quick-connect terminal 6,3 x 0,8 mm

Packaging unit

50 Pcs

Table of Variants GSP2

Protection Class	PCB mounting	Panel Thickness s [mm]	PCB terminal spacing	Ground terminal	Cover	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

I	Snap-in	1.5	9.05/9.7	QC 4.8 x 0.8, 90° to PIN-axis		GSP2.8101.13	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, 90° to PIN-axis		GSP2.9101.13	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, 90° to PIN-axis		GSP2.9901.13	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, 90° to PIN-axis	•	GSP2.9111.13	50
I	Snap-in	1.5	9.05/9.7	QC 4.8 x 0.8, in line with PIN-axis		GSP2.8003.13	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9003.13	50
I	Snap-in	1.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9103.11	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9103.13	50
I	Snap-in	2.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9103.14	50
I	Snap-in	2.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9103.15	50
I	Snap-in	3.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9103.16	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9903.13	50
I	Snap-in	1.0	9.05/9.7	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.8113.11	50
I	Snap-in	1.5	9.05/9.7	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.8113.13	50
I	Snap-in	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9113.13	50
I	Snap-in	2.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9113.14	50
I	Snap-in	3.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9113.16	50
I	Snap-in	1.5	9.05/9.7	Solder, 90° to PIN-axis		GSP2.810C.13	50
I	Snap-in	3.0	7/7.3	Solder, in line with PIN-axis	•	GSP2.911E.16	50
I	Screw	1.5	9.05/9.7	QC 4.8 x 0.8, 90° to PIN-axis		GSP2.8201.13	50
I	Screw	1.5	9.05/9.7	QC 4.8 x 0.8, in line with PIN-axis		GSP2.8203.13	50
I	Screw	1.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9203.11	50
I	Screw	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9203.13	50
I	Screw	2.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9203.14	50
I	Screw	3.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9203.16	50
I	Screw	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis		GSP2.9205.13	50
I	Screw	1.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9213.13	50
I	Screw	2.5	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9213.15	50
I	Screw	3.0	7/7.3	QC 4.8 x 0.8, in line with PIN-axis	•	GSP2.9213.16	50
I	Screw	1.5	9.05/9.7	Solder, 90° to PIN-axis		GSP2.820C.13	50
I	Screw	1.5	9.05/9.7	Solder, in line with PIN-axis		GSP2.820E.13	50
II	Snap-in	1.5	7/7.3	-		GSP2.9100.13	50
II	Snap-in	3.0	7/7.3	-		GSP2.9100.16	50
II	Snap-in	1.5	7/7.3	-	•	GSP2.9110.13	50
II	Screw	1.5	7/7.3	-		GSP2.9200.13	50
II	Screw	2.0	7/7.3	-		GSP2.9200.14	50
II	Screw	3.0	7/7.3	-		GSP2.9200.16	50
II	Screw	1.5	7/7.3	-	•	GSP2.9210.13	50
II	Screw	2.0	7/7.3	-	•	GSP2.9210.14	50
Additional version on request, e.g.: Ground terminal straigt or quick-connect terminal 6,3 x 0,8 mm

Packaging unit

50 Pcs

References / Document Downloads

Mating Components GSP2

Mating Outlets/Connectors (13)

[Swipe to the left and right for more options]

4785

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4781

4781 Mounting: Power Cord, Cable, Connector: IEC C15

4784

4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15

6007.0204

Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black

6007.0212

Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black

6007.0214

Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6004.0215

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6003.0215

Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6000.0224

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6000.0214

Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black

6044.0215

Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black

6044.0204

Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black

Mating Outlets/Connectors shuttered (3)

[Swipe to the left and right for more options]

4783

4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

VAC13KS

VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black

VAC17KS

VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white

07.08.2025

Transformation_Date:	2025-08-07 15:50:11
Export_Path:	/Datasheets/Datasheet_GST_PG07_Export/KRAEHECH/GSP2/2025_08_07/15_44_59_636_554776/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Connectors (Inlets/Outlets)
Typ_Name:	GSP2
Typ_AliasNames:	:gsp2:
Typ_ID:	435
Typ_Hierarchie:	020070220000002056
Typ_EPIM_Order:	510
Typ_Titel:	IEC Appliance Inlet C14 or C18, sandwich Mounting, PCB-Terminal
PublPrgr_Name:	Connector (Inlet/Outlet)
PublPrgr_Shortcut:	PG07
Variant table:	Variantentabelle V47 (22108)