Series: 0104U

IEC Connector C19, Rewireable, Straight

2 Variants

Connectors (Inlets/Outlets)

C19

70° C

Approvals and Compliances

CAD

Description

Cord connector straight
Rewireable cable assembly
Pin temperature 70 °C, Protection class I
Max. cable diameter 10.0 mm
Max. wire size 1.5 mm² / 14AWG
Min. wire size 1.0 mm² / 18AWG

Characteristics

Suitable for use in equipment according to IEC/UL 62368-1

Detailed request for product

Details 0104U

Technical Data

Approvals and Compliances

CAD-Drawings

Dimension

Ratings IEC

The electrical characteristics describe the approved operating values for the state of rated current and rated voltage considering the mentioned conditions.
General information on electrical characteristics colors of fuses
Ratings IEC, UL/CSA General information on the rated current and the rated voltage at EMC products
Rated Voltage Rated current The values are different depending on the approval body and therefore are referenced in the corresponding admission cards for the respective product families. Details about the approvals and ratings are listed in the data sheets.
Search approval information for different families
Approvals

16 A / 250 VAC; 50 Hz

Ratings UL/CSA

Ratings UL

20 A / 250 VAC; 60 Hz

Dielectric Strength

Information about the maximum permissible voltage, to avoid a voltage breakdown due to insulation damage.
Dielectric Strength

> 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)

Allowable Operation Temperature

-25 °C to 70 °C

IP-Protection

The IP code consists of a two-digit number, which indicates the respective degree of protection.
The first digit specifies the protection from the penetration of foreign objects, the second digit the protection from water penetration with harmful effects. Details about IP protection degree can be looked up in the general product information
IP-Protection

front side IP20 acc. to IEC 60529

Protection against electric shock

IP-Protection

Suitable for appliances with protection class I acc. to IEC 61140

Terminal

Terminals

Terminals according IEC Standard.
Detailed information about terminals can be looked up in the date sheet or in the general product information.
Terminal

Screw clamps

Material: Housing

PA6, black, UL 94V-0

Appliance inlet/-outlet

Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42
Details on connectors and their names can be found in the general product information
Appliance Couplers Mating Connectors Term explanation Special Connector Designs

C19 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 0104U

Approval Logo	Certificates	Certification Body	Description
	VDE Approvals	VDE	Certificate Number: 40036952
	UL Approvals	UL	UL File Number: E96454

Product standards

Product standards that are referenced

Design	Standard	Description
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	IEC 60320-1	Appliance couplers for household and similar general purposes
Designed according to	UL 60320-1	Standard for Attachment Plugs and Receptacles
Designed according to	CSA C22.2 no. 60320-1	General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization	Design	Standard	Description
	Suitable for applications acc.	IEC/UL 62368-1	Audio/video, information and communication technology equipment - Part 1: Safety requirements

Compliances

The product complies with following Guide Lines

Details	Initiator	Description
CE declaration of conformity	SCHURTER AG	The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity	SCHURTER AG	The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008.
RoHS	SCHURTER AG	Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS	SCHURTER AG	The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
REACH	SCHURTER AG	On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

Dimensions [mm]



	1) Cut cable guard to suit cable diameter

Short Table of Variants 0104U Open complete table 0104U

Color	Recommended cable diameter	Max. wire size	Order Number	...

black	10 mm	3 x 1.5 mm² / 14 AWG	3-109-087	...
black	8.5 - 10 mm	3 x 1.5 mm² / 14 AWG	3-109-088	...
Max. torque for screws: Terminals: 0.8 Nm, Cable clamps: 0.4 Nm, Cover: 0.5 Nm

Packaging unit

50 Pcs

Table of Variants 0104U

Color	Recommended cable diameter	Max. wire size	L = Length of cable guard	Order Number	PU Packaging unit The packaging unit is the amount of parts in a standard package. Please contact SCHURTER for further assistance: Contact Form

black	10 mm	3 x 1.5 mm² / 14 AWG	L = 30 mm	3-109-087	50
black	8.5 - 10 mm	3 x 1.5 mm² / 14 AWG	L = 35 mm	3-109-088	50
Max. torque for screws: Terminals: 0.8 Nm, Cable clamps: 0.4 Nm, Cover: 0.5 Nm

Packaging unit

50 Pcs

References / Document Downloads

Mating Components 0104U

Mating Inlets/Plugs (14)

[Swipe to the left and right for more options]

4798

4798, Mounting: Screw, IP40 / IP54, Appliance Inlet: IEC C20, Suitable for appliances with protection class I

1601

1601, Mounting: Screw, Solder terminal in line with PIN-axis, IP20, Appliance Inlet, C20

4793

4793, Mounting: Snap-in, IP30, Appliance Inlet: IEC C20, Suitable for appliances with protection class I or II

1621

IEC Appliance Inlet C20, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal

5130

IEC Appliance Inlet C20 with Filter, ECO design, front or rear side Mounting

C20F

C20F, Mounting: Screw Front-/Rear-Side, Filter: Standard and Medical Version, Capacitor: X2, 16 A, Solder / quick connect / wires (stranded), prewired

C22F

C22F, Mounting: Screw Front-/Rear-Side, Filter: Standard and Medical Version, Capacitor: X2, 16 A, Solder / quick connect / wires (stranded), prewired

4796

4796, Mounting: Power Cord, Cable, Plug: IEC I

4789

4789, Mounting: Power Cord, Screw, Plug: IEC I

EF11

IEC Appliance Inlet C20 with Circuit Breaker TA45

EC11

EC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 2-pole, Appliance Inlet IEC C20, Quick connect terminals 6.3 x 0.8 mm, prewired

6136

6136, Mounting: mm Rocker switch: non-illuminated or illuminated 1-pole, Appliance Inlet IEC C20, Quick connect terminals 6.3 x 0.8 mm, unwired 0 0 0 0 0 0

EC12

EC12, Mounting: Screw Front Side, Filter: Standard and Medical Version, Capacitor: X2, 16 A, Quick connect terminals 6.3 x 0.8 mm, prewired

EF12

IEC Appliance Inlet C20 with Filter, Circuit Breaker TA45 (recessed)

26.09.2024

Transformation_Date:	2024-09-27 02:03:16
Export_Path:	/Datasheets_PrGrp_Workflow/DS_PrGrp_WF_GST/DS_PrGrp_WF_GST_PG07b_Export/2024_09_26/14_33_05_687_552450/PGRSplits/
Export_Lang:	en
SGE_Name:	Connectors
PG_Name:	Cord Connectors (Rewireable)
Typ_Name:	0104U
Typ_AliasNames:	:0104u:
Typ_ID:	86447
Typ_Hierarchie:	020070430000002406
Typ_EPIM_Order:	220
Typ_Titel:	IEC Connector C19, Rewireable, Straight
PublPrgr_Name:	Cord Connectors
PublPrgr_Shortcut:	PG07b
Variant table:	Variantentabelle V33 (21909)